Manufacturing process

Multi-directional forging of ball valve bodies


How Ludon Forge forms a one-piece ball valve body blank, and what the valve manufacturer needs to specify before forging and machining begin.

The geometry of a forged ball valve body

The body has a main flow passage, a perpendicular stem connection and the features needed for its end connections. The forging route must leave suitable material for the valve manufacturer's final dimensions.

How multi-directional forging forms the blank

In Ludon Forge's published process, the heated billet is enclosed in a split die and punches act from different directions within one heat. The process forms the main bore and stem boss together as a one-piece blank.

A bin of blasted one-piece forged ball valve body blanks at Ludon Forge.
One-piece forged ball valve blanks before CNC machining.

The one-piece body has no welded joint between the formed body and stem boss. This describes the blank's construction; it does not replace material verification, dimensional inspection or the completed valve's testing.

What remains to be machined?

A formed bore is a starting feature, not a finished sealing or locating surface. The seat pockets, stem bore, end connections and other critical features must meet the customer's drawing after machining.

  • Forged blank: agree the stock your machine shop needs around critical features.
  • Rough machined blank: identify the locating surfaces and the remaining machining allowance.
  • Finish machined part: provide the complete drawing and agreed acceptance requirements.

Whether the route reduces weight, machining time or total cost must be assessed for the particular drawing. We do not assign a single saving or tolerance to every valve body.

What we review before quotation

  1. Body geometry, including bore, stem boss, connection faces and available machining stock.
  2. Material specification and the required heat treatment.
  3. Supply condition and any surface-preparation requirement.
  4. Annual demand, initial batch size and requested delivery date.
  5. Material documentation, dimensional checks and first-article requirements.

Our standard ball valve body programme covers NPS ½″–4″ (DN15–DN100) in A105, F304 and F316. Designs outside the standard programme and custom grades are reviewed against the enquiry.

Frequently asked questions

Is every ball valve body suitable for multi-directional forging?

The drawing needs a forgeability review. Geometry, material, machining requirements and quantities determine the proposed tooling and production route.

Does a one-piece body establish the finished valve's pressure rating?

The completed valve's rating depends on the valve design, material, service conditions and applicable acceptance requirements. The body forging is one component of that assembly.

Can I buy the body before final machining?

Yes. Ludon Forge supplies forged blanks and rough machined blanks as well as finish machined parts. Specify the required condition and drawing revision.

Products and technical documents

Forged valve bodies, materials and supply options · Closed-die forging advantages · 2026 capability catalogue (PDF)

Send a body drawing